PrestaShop, Docker, SSL, Nginx Reverse Proxy

This is a common problem for Prestashop as viewed on the https://github.com/PrestaShop/docker and Prestashop forums. Here’s some configurations I found necessary to handle this. I was able to get it working. First off, there are a few files you need to keep in mind: The DB has two tables: ps_shop_url, ps_ssl_enabled, which must be edited manually. The nginx.conf must have the right settings (they can be the same as a wordpress reverse proxy, so start there). And it was necessary to set $_SERVER[‘HTTPS’] = ‘on’; in the prestashop_root/config/ folder under one of the defines. I used defines_custom.inc.php. I understand this is not best practice, but I got it to work. Interested users should research where it’s best to put custom edits for Prestashop. Here’s quickly some more notes:

nginx.conf:
# shopping site redirect
server {
#server tokens hides the nginx identifying itself
server_tokens off;
server_name shop.mysite.com;
listen 80;

 

location ^~ /.well-known {
alias /var/www/html/.well-known/;
#autoindex on;
}
location / {
##** nginx redirect ALL http requests to https ** ##
return 301 https://$server_name$request_uri;
#from gist mentioned below
#rewrite ^ https://$host$request_uri? permanent;}
}server {
#server tokens hides the nginx identifying itself
server_tokens off;
server_name shop.mysite.com;
#listen 80;
listen 443 ssl;
ssl_certificate /etc/letsencrypt/live/mysite.com/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/mysite.com/privkey.pem;location / {
proxy_redirect off;
proxy_pass http://prestashop;#these were from wp, but not usable here, according to:
#https://gist.github.com/chroriginal/8d8ea7d284bcc42055a6ba18c04aeccf
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $host;#this was from gist, but doesn't work.
#proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#proxy_set_header Host $http_host;
#proxy_set_header X-Forwarded-Proto https;
#from git issues tracker
proxy_connect_timeout 300;
proxy_send_timeout 300;
proxy_read_timeout 300;
send_timeout 300;}}

Here is the docker-compose.yml:

version: '3'


services:
  nginx:
    image: nginx:latest
    container_name: production_nginx
    volumes:
      - ./nginx.conf:/etc/nginx/nginx.conf
      - /etc/letsencrypt/:/etc/letsencrypt/
      - ./webroot/:/var/www/html/
    ports:
#be careful with these. Port 80 on container side must match nginx listen port. the host side port, is only for the docker proxy.
      - 80:80
      - 443:443

    restart: always
#    command: [nginx-debug, '-g', 'daemon off;']

  db_prestashop:
    image: mysql:5.7
    environment:
      - MYSQL_ROOT_PASSWORD=xxxxxx
      - MYSQL_USER=xxxxxx
      - MYSQL_PASSWORD=xxxxxx
      - MYSQL_DATABASE=prestashop
    volumes:
      - ./db_data_presta:/var/lib/mysql
      - ./db_conf_presta:/etc/mysql/
    restart: always

  prestashop:
    depends_on:
        - db_prestashop
    image: 'prestashop/prestashop'
    volumes:
       - ./presta_root:/var/www/html/
    environment:
      - DB_SERVER=db_prestashop
      - ADMIN_MAIL=xxxxxx
      - ADMIN_PASSWD=xxxxxx
      - VIRTUAL_HOST=https://URLHERE
      - VIRTUAL_PORT=80
      - PS_DOMAIN=https://URLHERE
      - DB_NAME=prestashop
      - DB_USER=xxxxxx
      - DB_PASSWD=xxxxxx
      restart=always

I don’t believe the DB_NAME or DB_USER variable is used in docker for prestashop. DB config is done at installation. Virtual host likewise, may not be necessary.

use prestashop
SELECT NAME, VALUE FROM ps_configuration WHERE NAME IN ('PS_SSL_ENABLED', 'PS_SSL_ENABLED_EVERYWHERE');
UPDATE ps_configuration SET VALUE = '1' WHERE NAME IN ('PS_SSL_ENABLED', 'PS_SSL_ENABLED_EVERYWHERE');
SELECT NAME, VALUE FROM ps_configuration WHERE NAME IN ('PS_SSL_ENABLED', 'PS_SSL_ENABLED_EVERYWHERE');

Also, one other change on the DB. You should ensure that your shop URL is set to be something like URL.com
You do NOT want https://URL.com in either domain or domain\_ssl in ps\_shop\_url

mysql> select * from ps_shop_url;
+-------------+---------+--------------------------+--------------------------+--------------+-------------+------+--------+
| id_shop_url | id_shop | domain                   | domain_ssl               | physical_uri | virtual_uri | main | active |
+-------------+---------+--------------------------+--------------------------+--------------+-------------+------+--------+
|           1 |       1 | shop.steaky.com | shop.steaky.com | /            |             |    1 |      1 |
+-------------+---------+--------------------------+--------------------------+--------------+-------------+------+--------+
1 row in set (0.00 sec)

Firejail and MuPDF permissions error: “X Error of failed request: GLXBadContext”

Was setting up Firejail and MuPDF on Funtoo 1.3…

$ firejail mupdf sample.pdf

Reading profile /etc/firejail/mupdf.profile
Reading profile /etc/firejail/disable-common.inc
Reading profile /etc/firejail/disable-devel.inc
Reading profile /etc/firejail/disable-interpreters.inc
Reading profile /etc/firejail/disable-passwdmgr.inc
Reading profile /etc/firejail/disable-programs.inc
Reading profile /etc/firejail/disable-xdg.inc
Reading profile /etc/firejail/whitelist-var-common.inc
Parent pid 31753, child pid 31754
Private /etc installed in 82.08 ms
Blacklist violations are logged to syslog
Child process initialized in 235.06 ms
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
X Error of failed request: GLXBadContext
Major opcode of failed request: 150 (GLX)
Minor opcode of failed request: 6 (X_GLXIsDirect)
Serial number of failed request: 36
Current serial number in output stream: 35

Parent is shutting down, bye...

After searching around online with other MuPDF issues (issues tracker, etc. I had some other ideas.

$strace firejail mupdf sample.pdf



setresuid(-1, 0, -1) = -1 EPERM (Operation not permitted)
setresgid(-1, 0, -1) = -1 EPERM (Operation not permitted)
unlink("/run/firejail/bandwidth/31761-bandwidth") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/network/31761-netmap") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/name/31761") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/x11/31761") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/profile/31761") = -1 ENOENT (No such file or directory)
setresuid(-1, 1000, -1) = 0
setresgid(-1, 1000, -1) = 0
getppid() = 31759
setresuid(-1, 0, -1) = -1 EPERM (Operation not permitted)
setresgid(-1, 0, -1) = -1 EPERM (Operation not permitted)
openat(AT_FDCWD, "/proc/31759/comm", O_RDONLY) = 3
read(3, "strace\n", 4095) = 7
close(3) = 0
setresuid(-1, 1000, -1) = 0
setresgid(-1, 1000, -1) = 0
getuid() = 1000
geteuid() = 1000
getuid() = 1000
geteuid() = 1000
getuid() = 1000
geteuid() = 1000
openat(AT_FDCWD, "/etc/firejail/firejail.config", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=4395, ...}) = 0
read(3, "# This is Firejail system-wide c"..., 4096) = 4096
read(3, " third dimension is\n# color dept"..., 4096) = 299
read(3, "", 4096) = 0
close(3) = 0
getuid() = 1000
geteuid() = 1000
getuid() = 1000
geteuid() = 1000
getuid() = 1000
geteuid() = 1000
getuid() = 1000
stat("/bin/bash/", 0x7ffe9b611270) = -1 ENOTDIR (Not a directory)
stat("/bin/bash", {st_mode=S_IFREG|0755, st_size=926688, ...}) = 0
access("/bin/bash", X_OK) = 0
getuid() = 1000
geteuid() = 1000
openat(AT_FDCWD, "/home/farm/.config/firejail", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such
file or directory)
getuid() = 1000
geteuid() = 1000
openat(AT_FDCWD, "/etc/firejail", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 3
fstat(3, {st_mode=S_IFDIR|0755, st_size=32768, ...}) = 0
getdents(3, /* 566 entries */, 32768) = 22808
getuid() = 1000
geteuid() = 1000
stat("/etc/firejail/mupdf.profile/", 0x7ffe9b60f0d0) = -1 ENOTDIR (Not a directory)
access("/etc/firejail/mupdf.profile", R_OK) = 0
openat(AT_FDCWD, "/etc/firejail/mupdf.profile", O_RDONLY) = 4
getpid() = 31761
setresuid(-1, 0, -1) = -1 EPERM (Operation not permitted)
setresgid(-1, 0, -1) = -1 EPERM (Operation not permitted)
openat(AT_FDCWD, "/run/firejail/profile/31761", O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 EACCES (Permission denied)
write(2, "Error: cannot create /run/fireja"..., 49Error: cannot create /run/firejail/profile/31761
) = 49
setresuid(-1, 0, -1) = -1 EPERM (Operation not permitted)
setresgid(-1, 0, -1) = -1 EPERM (Operation not permitted)
getpid() = 31761
unlink("/run/firejail/bandwidth/31761-bandwidth") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/network/31761-netmap") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/name/31761") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/x11/31761") = -1 ENOENT (No such file or directory)
unlink("/run/firejail/profile/31761") = -1 ENOENT (No such file or directory)
exit_group(1) = ?
+++ exited with 1 +++

It looks like the error is:
write(2, “Error: cannot create /run/fireja”…, 49Error: cannot create /run/firejail/profile/31761
) = 49

Solution

In gentoo, the mupdf profile  in /etc/firejail/has

# Firejail profile for mupdf
# Description: Lightweight PDF viewer
# This file is overwritten after every install/update
# Persistent local customizations
include /etc/firejail/mupdf.local
# Persistent global definitions
include /etc/firejail/globals.local

noblacklist ${DOCUMENTS}

include /etc/firejail/disable-common.inc
include /etc/firejail/disable-devel.inc
include /etc/firejail/disable-interpreters.inc
include /etc/firejail/disable-passwdmgr.inc
include /etc/firejail/disable-programs.inc
include /etc/firejail/disable-xdg.inc

include /etc/firejail/whitelist-var-common.inc

caps.drop all
machine-id
net none
nodbus
nodvd
nogroups
nonewprivs
noroot
nosound
notv
novideo
protocol unix
seccomp
# seccomp.keep
access,arch_prctl,brk,clone,close,connect,execve,exit_group,fchmod,fchown,fcntl,fstat,futex,getcwd,getpeername,getrlimit,getsock$
shell none
tracelog

# private-bin mupdf,sh,tempfile,rm
private-dev
private-etc fonts
private-tmp

# mupdf will never write anything
read-only ${HOME}

However, the private-etc fonts will cause this error. This was found by brute force troubleshooting (delete entries from profile, until it works).

Comment it out, and MuPDF should display correctly.

now you will get:

$ firejail mupdf sample.pdf
Reading profile /etc/firejail/mupdf.profile
Reading profile /etc/firejail/disable-common.inc
Reading profile /etc/firejail/disable-devel.inc
Reading profile /etc/firejail/disable-interpreters.inc
Reading profile /etc/firejail/disable-passwdmgr.inc
Reading profile /etc/firejail/disable-programs.inc
Reading profile /etc/firejail/disable-xdg.inc
Reading profile /etc/firejail/whitelist-var-common.inc
Parent pid 31763, child pid 31764
Blacklist violations are logged to syslog
Child process initialized in 130.35 ms
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965

and the PDF opens.